STZW серийная сборная насосная станция
интегральная сборная насосная станция
—
с быстрым развитием городского строительства в нашей стране бытовые и производственные сточные воды постепенно влияют на наше производство и жизнь.сточные трубы находятся ниже муниципальных канализационных сетей или в районах, удаленных от городских магистральных сетей, что затрудняет их сброс.В то же время длительное содержание сточных вод будет оказывать значительное воздействие на окружающую среду в целом.три сборные насосные станции серии WZ способны эффективно решать вопросы сброса и удаления сточных вод.можно быстро и эффективно доставлять сточные воды на специально оборудованные очистные сооружения и устранять экологические последствия их длительного пребывания.
Приложение
городской дождь
сброс дождевой воды
автодорожный вокзал
дождь и наводнение
продукты
короткий период
высокая степень интеграции
долговечность
высокоэффективный
по заказу
описание
конструктивная
продукции
Process
1
Determining pump
flow and lift
2
The height of the cylinder head and the height of the inlet / outlet are determined.
3
Calculate the minimum effective volume of pump station and estimate the cylinder
4
Selection of pump and determination of pump operation mode
5
Determine the inlet / outlet diameter of the pump station
6
Selection of pump station function, accessories material, brand and control system components
7
Complete the selection and configuration of pump station
Product notes
Transport
During the transportation of the pump station, it must be placed horizontally and fixed on the truck with soft rope. The connection between the soft rope and the cylinder must be fixed with steel wire rope prohibited. It is forbidden to place heavy objects on the upper part of pump station barrel.
Hoisting
Before the pump station is put into the foundation pit, the horizontal surface of the concrete foundation must be free from inclination, otherwise the tank body will be broken and the liquid inside the pump station will leak. When the pump station is hoisted into the foundation pit, all lifting lugs shall be used for hoisting, and each lug shall be evenly stressed. Pay attention to the alignment of inlet and outlet during hoisting.
Fixed
Lift the pump station from the working area to the concrete base plate, and then install the fixed pressing plate. The fixed pressing plate is installed on the conical plate at the bottom of the prefabricated pump station with a certain diameter, and fixed with the expansion bolt and pressing plate.
Grouting
It is recommended to use cement concrete with grade no less than C30 strength and gravel diameter no more than 32mm. During grouting, the bottom of the barrel shall be mixed to ensure that the concrete can evenly distribute the bottom of the barrel and fill all the voids. After grouting, it is necessary to observe the settlement of the concrete floor for 24 hours. In case of any settlement, it is necessary to inform the relevant staff in time and take remedial measures.
Backfill
Backfilling shall be carried out evenly all around. It is forbidden to pour backfill materials directly to one side of the foundation pit.
The backfill material shall not contain dynamic soil, expansive soil or corrosive soil, and shall be compacted in layers.
The backfill shall be compacted to avoid the pipeline tension inside the pump station acting on the external pipeline.
It is strictly prohibited for large stones to fall into the backfill pit, so as to avoid damage to the barrel caused by falling on the barrel of the pump station.
Debugging
Before commissioning and maintenance personnel operate the integrated prefabricated pump station, please read the installation and operation instructions of the integrated prefabricated pump station provided by our company carefully. And make sure that your debugging and maintenance personnel operate in strict accordance with the company's operating instructions. To ensure that you can use the product safely and effectively.
адрес: провинция чжэцзян, г.
телефон：+86-576-81684288
телефакс：+86-576-81684088
почта：sales@santongpump.com
